AYJ-LLY10 3in1 Body fat burning slimming weight loss instrument

 Instrument introduction

That is, the three technologies of super energy, heating and negative pressure are integrated in order to achieve the purpose of shaping, firming the skin and improving the body shape of obese people.

Schematic diagram of instrument interface

Instrument operation steps

(Ⅰ)Use method of big thermoacoustic handle: (25-30min)

Big thermoacoustic handle and small thermoacoustic handle do not need to be used at the same time;

1. Prepare the product so that it will not be dizzy immediately on the body;

2. Evenly apply the product on the parts of the customer being operated;

3. Select thermoacoustic handle to enter the interface, select the [mode] mode and adjust the time, click the [start/pause] button to start the instrument work, until the probe contact skin stable and stick, then click the [energy] to open the energy (adjust the super energy), the energy is adjustable from 1-20, starting from 1, with 1 step, Adjust the appropriate energy according to customer tolerance; Then click the probe [energy] to open the energy (to adjust the heating energy), the energy is adjustable from 1-20, starting from 1, with 1 step, according to the customer tolerance to adjust the appropriate energy;

v Warm tips: the probe operating surface should be perpendicular to the skin, close to the skin sliding or circular operation, not stay in a position for too long, no products or products are rare, please timely add products for operation, to avoid empty burning probe resulting in probe damage;

v Mode: (Output time) Mode A interval for 2 seconds, mode B interval for 3 seconds, mode C interval of 5 seconds, mode D is continuous energy, it is recommended to use mode D;

4. After the operation is finished, first set the energy to"0"or click the"Start/Pause"button to pause, and then move the operating handle away from the customer's operating position.

 Note:

a. It is prohibited to directly act on any part of the customer with high energy. When touching the skin, the product is in the place of circular operation;

b. It is forbidden to suddenly move the handle away from the customer's operating part during the operation (high energy);

(Ⅱ).Use method of small thermoacoustic handle: (10-15min)

1. Prepare the product so that it will not be dizzy immediately on the body;

2. Evenly apply the product on the parts of the customer being operated;

3. On the instrument interface, select the thermoacoustic handle to enter, select [mode] mode and adjust the time, click [Start/pause] button to start the instrument work, when the probe contacts the skin smoothly and takes the paste, then click [energy] to open the energy (adjust the super energy), the energy is adjustable from 1-10, starting from 1, with 1 step, Adjust the appropriate energy according to customer tolerance; Then click the probe [energy] to open the energy (to adjust the heating energy), the energy is adjustable from 1-20, starting from 1, with 1 step, according to the customer tolerance to adjust the appropriate energy;

v Warm tips: the operating surface of the probe should be perpendicular to the skin, close to the skin sliding or circular operation, do not stay in one position for too long, to avoid scald customers;

v Mode: (Output time) Mode A interval for 2 seconds, mode B interval for 3 seconds, mode C interval of 5 seconds, mode D is continuous energy, it is recommended to use mode D;

1.After the operation is finished, first set the energy to"0"or click the"Start/Pause"

button to pause, and then move the operating handle away from the customer's operating position.

Note:

c. It is prohibited to directly act on any part of the customer with high energy. When touching the skin, the product is in the place of circular operation;

d. It is forbidden to suddenly move the handle away from the customer's operating part during the operation (high energy);

e. When only using the small thermoacoustic handle to operate small parts, the operation time can be 25-30min;

Use method of thermal vacuum: (10-15min)

1. After the operation, clean the parts that need to be operated and apply appropriate amount of essential oil until the oil is glossy.

2. Select the thermal vacuum handle on the interface to enter the interface, select the [mode] mode and adjust the time, click the [Start/pause] button to start the instrument work, when the probe contacts the skin smoothly, click the [negative pressure] to open the thermal vacuum, the negative pressure can be adjusted from 1-9, starting from 1, step by step, adjust the appropriate suction according to customer tolerance. Then click [energy] open energy, energy is adjustable from 1-20, starting with 1, to 1 step, according to the customer tolerance to adjust the appropriate energy;

v Warm tips: Mode A suck 1 second, mode B suck 2 seconds, mode C suck 3 seconds, mode D long suction, it is recommended to use mode D.

 Note:

a. The suction hole in the middle of the negative pressure head plugs the filter rod (one guest, one use);

b. Negative pressure heating energy should not be too high, so as not to burn, it is recommended to adjust the energy to 1-2;

Company Advantage

1. We are professional manufacturer pioneering beauty equipment & furniture industry in China.

2. We possess our own 2 factories with an area of 1000 square meters.

3. We provide better OEM & ODM services, because we have our own R&D

department with more than 20 experienced designers and engineers.

4. We provide better after-sales services, because we have a professional technical

team to help you solve any problems immediately!

5. Our products have got certifications like CE, TUV, EMC and so on.

6. Our products are sold to most countries all over the world without any problems.

7. Price can be negotiated.

8. Patient explanations of any questions.

9. Fast and safe delivery.

10. What you can get is not only high quality products with competitive price, but also

 a  sincere business partner and a good friend !

Shipping service: